No Joke electrician
Generator Specialists
A generator without proper transfer switch installation is either useless or dangerous. No Joke electrician installs whole-home standby generators and portable generator transfer switches in Old Orchard with permit, load calculation, and safe interconnection to your home’s electrical system. No back-feeding the grid. No DIY shortcuts.
Why No Joke electrician
Connecting a generator in Old Orchard directly to your electrical panel without a transfer switch creates back-feed that can electrocute utility workers restoring power on the line. Every generator installation we do in Old Orchard includes proper transfer switch installation — manual or automatic — that isolates your home’s circuits from the utility grid when the generator is running.
A generator that is too small for the circuits it is meant to power will run under constant overload, shortening its lifespan and potentially failing during the storm event you bought it for. We calculate the load for your selected critical circuits in Old Orchard before recommending generator size, so your Old Orchard generator investment actually powers what you need it to.
Generator installation in Old Orchard that involves new wiring, transfer switch installation, or a new circuit connection to your panel requires a permit. We pull the permit, schedule the inspection, and provide the completed documentation for your Old Orchard property records. Unpermitted generator installations create problems at sale and with insurance claims.
Standby generators in Old Orchard must be placed a minimum distance from windows, doors, and utility meters per NEC and local code. We assess placement options on your Old Orchard property before installation and confirm the chosen location meets all code requirements for distance from openings, fuel supply routing, and exhaust direction.
Services
Generator installation in Old Orchard covers several distinct scenarios depending on the type of generator (standby or portable) and the level of circuit coverage needed. The electrical work involved ranges from a single circuit transfer interlock for a portable generator to a whole-home automatic transfer switch with a new standby generator tied to natural gas or propane. Below are the specific installation configurations we handle in Old Orchard.
A standby generator in Old Orchard is permanently installed outside your home, connected to natural gas or propane, and wired through an automatic transfer switch that senses utility power loss and starts the generator automatically within seconds — without you having to do anything. Installation involves selecting and preparing the placement pad, routing the fuel line from the gas meter (coordinated with the gas company), installing the automatic transfer switch at your Old Orchard panel, running the generator connection wiring, and commissioning the automatic start function. Standby generator installations in Old Orchard require permits and are inspected by the local authority. We manage the entire process from placement assessment to final commissioning, including the gas line coordination.
If you already own or plan to purchase a portable generator in Old Orchard, a transfer switch is what makes it safe to connect to your home’s electrical system. A manual transfer switch is installed at your Old Orchard electrical panel and connects selected critical circuits — refrigerator, furnace blower, lighting, HVAC — to an external inlet that your portable generator connects to via a generator cord. When utility power fails, you start the generator, plug the cord into the inlet, and switch the selected circuits to generator power on the transfer switch. The interlock physically prevents the utility breaker and generator breaker from being on at the same time, eliminating back-feed. Transfer switch installation for a portable generator is a more affordable way to safely connect backup power in Old Orchard than a full standby installation.
An interlock kit for a portable generator is a simpler and less expensive alternative to a full transfer switch for Old Orchard homeowners who want backup power without the cost of a full transfer switch panel. An interlock kit is a mechanical device added to your existing Old Orchard panel that physically prevents the main utility breaker and a dedicated generator inlet breaker from being on simultaneously. This provides the back-feed protection of a transfer switch at lower cost, though it requires manually switching individual breakers rather than having dedicated transfer switch circuit positions. Interlock kit installation in Old Orchard is appropriate when the panel layout supports it — not all panels do. We assess your Old Orchard panel and confirm compatibility before recommending this option.
One of the most important decisions in Old Orchard generator installation is whether to size the generator for whole-home coverage or for critical circuits only. A whole-home standby generator in Old Orchard sized to cover every circuit simultaneously requires a much larger and more expensive unit than one sized to run your HVAC, refrigerator, lighting, and selected outlets. Most Old Orchard homeowners find that a generator sized for critical circuits covers everything that genuinely matters during an outage — food preservation, heating or cooling, basic lighting, and phone charging — at a substantially lower cost than a whole-home unit. We provide both options and calculate the load for each approach so you can make an informed decision before purchasing any equipment.
Process
We assess your Old Orchard panel, placement options, and critical circuit load to determine the correct generator size and transfer switch configuration for your property.
We pull the Old Orchard installation permit and, for standby gas generators, coordinate with the gas utility for the fuel line connection to the new generator pad location.
The transfer switch is installed at your Old Orchard panel, the generator circuit is wired, and the connection is tested for proper isolation from the utility grid before the generator is connected.
The generator is started, automatic transfer function is tested (standby models), the permit inspection is scheduled, and you receive documentation for your Old Orchard property records.
Reviews
After a week without power following a storm in Old Orchard, we decided it was time for a standby generator. No Joke electrician handled the entire process — placement, permit, gas line coordination, transfer switch, and commissioning. The generator came on automatically during a test outage two weeks after installation. The level of coordination they managed with the utility and the permit office was genuinely impressive. No generator headaches for us.
We had a portable generator but had been using it with an extension cord, which I knew was wrong. No Joke electrician installed a transfer switch for the critical circuits in our Old Orchard home — HVAC, fridge, kitchen outlets, lights — and an exterior inlet for the generator cord. The whole install took one day. Now when the power goes out we just start the generator, plug it in, and flip the transfer switch. Properly done and permitted.
I called three companies in Old Orchard for generator installation quotes. No Joke electrician was the only one who actually did a load calculation before recommending a generator size. The other two just told me what size to buy without asking what I wanted to run. No Joke electrician sized correctly for our actual critical circuits and the quote was the most honest. Installation was clean and the permit was handled by their team. Exactly what a proper generator install should look like.
FAQ
A transfer switch is an electrical device that isolates your Old Orchard home’s circuits from the utility grid before connecting generator power. Without a transfer switch, electricity from your generator can travel back through your meter and onto the utility lines outside your Old Orchard home — a phenomenon called back-feed. Back-feed creates a lethal electrocution hazard for utility workers who are working on the line under the assumption that it is de-energized. The National Electrical Code and virtually every local jurisdiction in PA require a transfer switch or equivalent back-feed prevention device for any generator connected to a home’s electrical system. This is not an optional upgrade — it is a fundamental safety requirement of generator installation.
Generator sizing for a Old Orchard home depends entirely on which loads you want the generator to power. A portable generator sized for critical circuits — a refrigerator (typically 600–800 watts running), a furnace blower (400–1200 watts), lighting (varies), and a few outlets — can be handled by a 7,500–10,000 watt portable generator in most Old Orchard homes. Adding central air conditioning changes the math significantly, as a central AC unit typically requires 3,500–5,000 watts running and much more on startup. A whole-home standby generator sized for simultaneous full-home load may be 20,000 watts or more. We calculate the actual loads for your selected circuits in Old Orchard rather than guessing, so you buy the right size generator for your specific situation.
Standby generator placement in Old Orchard is governed by the NEC and often by local codes or manufacturer specifications. Common requirements include minimum distances from windows and doors (often 18 inches minimum, though many installers recommend more for comfort), distance from the utility meter and gas meter, distance from property lines, and fuel line routing requirements. Generators also produce exhaust and significant noise during operation, so placement on a side or rear of the Old Orchard property away from primary living spaces is typically preferred where the site allows it. We assess your specific Old Orchard property during the quote visit and identify viable placement locations before any commitment is made.
Yes, but it requires proper generator sizing to handle the startup surge. Central air conditioning units in Old Orchard have a running wattage and a startup wattage that can be two to three times higher than the running draw. A generator sized for the AC unit’s running load without accounting for startup surge will trip its own overload protection every time the compressor cycles on. A properly sized generator for Old Orchard air conditioning will be rated for a surge capacity at least equal to the AC unit’s locked-rotor amperage (LRA) startup draw. We size generators for Old Orchard homes that include central AC based on your AC unit’s actual electrical specifications, not a rule of thumb.
Yes. Generator installation in Old Orchard that involves connecting to the home’s electrical panel — which every proper generator installation does — requires a permit from the relevant local building or electrical inspection authority. This applies to both standby generator installations and transfer switch installations for portable generators. Standby generator installations that involve a new gas line connection additionally require a plumbing or gas permit for the fuel line work. We pull all required permits and manage the inspection process as part of our Old Orchard generator installation service, so you receive complete documentation that your installation passed inspection and is code-compliant.
Whole-home or critical circuits — we size it right, install it safely, pull the permit. Call for a Old Orchard generator quote.
📞 Call +1-866-821-0442